Contact us for more information on this trailer or any of our other 1,000+ trailers in stock.

Highlights:

• Heavy Duty 8" I-Beam (19#/foot)
• Low Deck Height of 28.5"
• 7 Gauge Floor, Machined Wall Breaks
• Supersized Toolbox; 10K Drop Leg Jack
• Powdura Powder Coat - 2 part with Primer

IronBull's DWB dump trailer brings 8" monoframe I-beam construction into the fold, making the unit 2" shorter than their standard DTB. The model includes 7-gauge floors, 24" 10-gauge sides with 7 machined brakes that will not bend, bow, or buckle even under the most demanding conditions. A supersized locking front toolbox with a divider ensures ample storage that will not interfere with your pump or battery. The front is capped off with a reinforced 2 5/16" coupler and standard 10k jack. A three-way gate will ensure maximum flexibility for transport and dumping, while the standard tarp will make sure your loads make it to their destination. D-rings, Y-hooks, and stake pockets are also thrown in for multiple tie-down options.

This model also comes equipped with slide-in ramps, Dexter Nev-R-Adjust brake axles, radial tires, and a 5-amp wall charger. 5/16 cylinder scissor hoists give you maximum lift power. All lights are sealed lifetime LEDs, and all trailers are equipped with sealed wire harnesses. These units are also backed by IB's IronClad warranty which covers every unit with a three-year structural, two year component warranty, and two years free roadside assistance. So, grab a bull by the horns and hook up to a DWB today.
Trying to decide between a DTB and DWB? The DWB has an 8" I-Frame and traditional crossmembers. The DTB has a 12" frame and full-length bed runners. Here is a quick introduction on the differences :




Basic Dude Stuff:

• Axles: 2 x Cambered Brake Axles
• Deck Height: 29"
• Jack: 10K Drop Leg Bolt-On
• Hoist: 5"x16" Hydraulic Cylinder Scissor Hoist
• Floor: 7 Gauge
• Sides: 10 Ga 24", 7 Machined Breaks
• Top Rail: Machined Break
• Tarp: Standard: extended length tarp with shroud
• Connections: Full Length Bed Runners, Stake Pockets, 4 x D-Rings
• Gate: 3-Way Spreader
• Ramps: 80'' Slide In
• Rear Stabilizers: Mounts, Optional Jacks
• Frame: 8" I-Beam frame (10 lb/ft), 4" tubing bedframe
• Crossmembers: 3 x 3/16" Channel Crossmembers, Full Length Bed Runners
• Tongue: 8" I-Beam (10#/ft)
• Coupler: 2 5/16" Adjustable
• Chains: 3/8"
• Suspension: Multi-leaf Slipper Spring Suspension
• Wheel: 8 Bolt
• Tires: 235/80R16
• Spare: Optional
• Spare Mount: Standard
• Brakes: Electric, Self Adjusting
• Fenders: 14 Ga Weld On Diamond Plate Fenders
• Paint: Powdura Powder Coat - 2 part with Primer
• Plug: 7-Way
• Lights: LED
• Warranty: 3 Year Structural, 2 Year Component, 2 Year Roadside : Includes Tow Vehicle

Other Iron Bull Dump Trailers: 5x10, 6x10, 6x12, 7x14, 7x16 with varied load ratings and side heights. A unique model is the Deckover Dump with fold down sides. Spare tire sold separately. All models are well equipped. High Sides Trailers - Goose Necks and more available as well!