Iron Bull 7 x 12 14K 36" Dump Trailer - DTB
| Manufacturer: | Iron Bull |
| Model Number: | DTB8312073 |
| Category: | Dump - Bumper Pull |
| GVWR: | 14,000 pounds |
| Weight: | 4,625 pounds |
| Payload: | 9,375 pounds |
| Volume: | 9 cubic yards |
Contact us for more information on this model or any of our other models in stock.
This Model is Available At:
| We are temporarily out of this trailer | Special Order | |
Description
Highlights:
Iron Bull DTB beast models are built to work. Every DTB is built on a dual layer of 6" I-beam that provides 24 lbs/ft of pure steel and puts maximum strength into the most critical part of your trailering system. The ramp track bed structure has full-length bed runners that reenforce the 7-gauge floor. Sides are 24" high and made of 10-gauge steel with seven machined breaks. DTBs will not bend, bow or buckle under high demand conditions.
Standard 10k jacks. A side step for easy bed access. A three-way gate ensures maximum flexibility for transport and dumping. IronClad warranty covers every unit with a three year structural, two year component warranty and two years free roadside assistance.
Trying to decide between a DTB and DWB? The DWB has an 8" I-Frame and traditional crossmembers. The DTB has a 12" frame and full-length bed runners. Here is a quick introduction on the differences :
Basic Dude Stuff:
Other Iron Bull Dump Trailers: 5x10, 6x10, 6x12, 7x14, 7x16 with varied load ratings and side heights. A unique model is the Deckover Dump with fold down sides. Spare tire sold separately. All models are well equipped. High Sides Trailers - Goose Necks and more available as well!
- Dual Stacked 6" I-Beam Frame (24#/foot)
- 7 Gauge Floor, Machined Wall Breaks
- Full Length Bed Runners
- Supersized Toolbox; 10K Drop Leg Jack
- Powdura Powder Coat - 2 part with Primer
Iron Bull DTB beast models are built to work. Every DTB is built on a dual layer of 6" I-beam that provides 24 lbs/ft of pure steel and puts maximum strength into the most critical part of your trailering system. The ramp track bed structure has full-length bed runners that reenforce the 7-gauge floor. Sides are 24" high and made of 10-gauge steel with seven machined breaks. DTBs will not bend, bow or buckle under high demand conditions.
Standard 10k jacks. A side step for easy bed access. A three-way gate ensures maximum flexibility for transport and dumping. IronClad warranty covers every unit with a three year structural, two year component warranty and two years free roadside assistance.
Trying to decide between a DTB and DWB? The DWB has an 8" I-Frame and traditional crossmembers. The DTB has a 12" frame and full-length bed runners. Here is a quick introduction on the differences :
Basic Dude Stuff:
- Axles: 2 x Cambered Brake Axles
- Deck Height: 31"
- Jack: 10K Drop Leg Bolt-On
- Hoist: 5"x16" Hydraulic Cylinder Scissor Hoist
- Floor: 7 Gauge
- Sides: 10 Ga 36", 7 Machined Breaks
- Top Rail: Machined Break
- Tarp: Standard: extended length tarp with shroud
- Connections: Full Length Bed Runners, Stake Pockets, 4 x D-Rings
- Gate: 3-Way Spreader
- Ramps: 80'' Slide In
- Rear Stabilizers: Mounts, Optional Jacks
- Frame: Dual Stacked 6" (12 lb/ft) I-Beam
- Crossmembers: 4" Tubing Bed Frame, 3 x 3/16" Channel Crossmembers
- Tongue: 6" I-Beam
- Coupler: 2 5/16" Adjustable
- Chains: 3/8"
- Suspension: Multi-leaf Slipper Spring Suspension
- Wheel: 8 Bolt
- Tires: 235/75R16
- Spare: Optional
- Spare Mount: Standard
- Brakes: Electric, Self Adjusting
- Fenders: 14 Ga Weld On Diamond Plate Fenders
- Paint: Powdura Powder Coat - 2 part with Primer
- Plug: 7-Way
- Lights: LED
- Warranty: 3 Year Structural, 2 Year Component, 2 Year Roadside : Includes Tow Vehicle
Other Iron Bull Dump Trailers: 5x10, 6x10, 6x12, 7x14, 7x16 with varied load ratings and side heights. A unique model is the Deckover Dump with fold down sides. Spare tire sold separately. All models are well equipped. High Sides Trailers - Goose Necks and more available as well!
What your spouse and accountant are going to ask you:
- Advertised prices are all-cash sales (cash, debit, personal or certified check)
- Credit cards incur a 3% convenience fee
- WA residents: a $200 negotiable documentation fee may be added
- NO SALES TAX collected for out of state buyers with Two Approved Forms of Identification proving out of State Residency - contact us for details
- Custom orders and deliveries are possible
- Images may display optional items
- VIN available at dealership
- Prices do not include tax, license, or titling fees
- Pricing and specifications may change without notice
- Measurements are estimates and believed to be reasonably accurate
- Our trailers sell fast! Make a (refundable) deposit to reserve your trailer today